研　　究　　論　　文 （Ｐａｐｅｒｓ）
　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　
1. S. Taira, M. Ohnami and T. Inoue
　　 Thermal Fatigue under Multiaxial Thermal Stresses
　　　　　　　Proceedings of 8th Japan Congress on Testing Materials, (1965-5) pp. 40-45

2. 平 修二, 大南正瑛, 井上達雄, 庵 文隆
　　 多軸熱応力下の熱疲労
　　　　　　材料, 第14巻, 第 146号 (昭和40年11月) 898-903頁

3. 平 修二, 井上達雄, 高橋光夫
　　 多軸応力下の塑性疲れ (高温において組合せ引張圧縮繰返し捩りを受ける場合)
　　　　　　日本機械学会論文集 (第 1部), 第32巻, 第 244号 (昭和41年12月), 1788-1792 頁

4. 平 修二, 大南正瑛, 井上達雄, 庵 文隆
　　 多軸熱応力下の熱疲労 (球状黒鉛鋳鉄の場合)
　　　　　　材料, 第16巻, 第 161号 (昭和42年 2月) 94-100 頁

5. S. Taira, T. Inoue and M. Takahashi
　　 Low Cycle Fatigue under Multiaxial Stresses (In the Case of Combined Cyclic Tension-compression and Cyclic Torsion in the Same Phase at Elevated Temperature)
　　　　　　Proceedings of 10th Japan Congress on Testing Materials, (1967-5) pp. 18-23

6. 平 修二, 井上達雄, 吉田紀元
　　 多軸応力下の塑性疲れ (高温において組合せ引張圧縮繰返し捩りが位相差をもって加わる場合)
日本機械学会論文集 (第 1部), 第34巻, 第 258号 (昭和43年 2月), 255-260 頁

7. S. Taira, T. Inoue and T. Yoshida
　　 Low Cycle Fatigue under Multiaxial Stresses (In the Case of Combined Cyclic Tension-compression and Cyclic Torsion in Out-of-phase at Elevated Temperature)
　　　　　　Proceedings of 11th Japan Congress on Materials Research,(1968-5) pp. 60-65

8. 平 修二, 井上達雄, 高尾 武
　　 厚肉中空円筒の弾塑性領域における熱応力
　　　　　　材料, 第17巻, 第 180号 (昭和43年 9月) 813-819頁

9. 平 修二, 大南正瑛, 安江彰治, 井上達雄
　　 静的平均応力と繰返し機械的応力が重畳する場合の熱疲労
　　　　　　材料, 第18巻, 第 186号 (昭和44年 3月) 247-253頁

10. 平 修二, 井上達雄, 吉田紀元
　　 多軸応力下の塑性疲れ (室温において組合せ引張圧縮繰返し捩りを受ける場合)
日本機械学会論文集, 第35巻, 第 271号 (昭和44年 3月) 526-532頁

11. S. Taira, T. Inoue and T. Yoshida
　　 　Low Cycle Fatigue under Multiaxial Stresses (In the Case of Combined Cyclic Tension-compression
and Cyclic Torsion at Room Temperature)
　　　　　　Proceedings of 12th Japan Congress on Materials Research, (1969-5) pp. 50-55

12. 植田秀夫, 井上達雄, 平 修二
　　 有限要素法による弾塑性熱応力の解析
　　　　　　材料, 第19巻, 第 198号 (昭和45年 3月) 175-181頁

13. 井上達雄, 高尾 武, 植田秀夫, 加藤忠司
　　 多軸熱応力下の熱疲労における寿命と熱き裂の伝ぱ
　　　　　　材料, 第19巻, 第 198号 (昭和45年 3月) 241-247頁

14. 井上達雄, 吉田紀元
　　 塑性疲労強度の温度依存性に関する研究
　　　　　　材料, 第20巻, 第 210号 (昭和46年 3月) 402-408頁

15. S. Taira, T. Inoue and H. Ueda
　　 Analysis of Elasto-plastic Thermal Stresses by the Finite Element Method
　　　　　　Proceedings of 14th Japan Congress on Materials Research, (1971-5) pp. 165-169

16. S. Taira and T. Inoue
　　 Thermal Fatigue under Multiaxial Thermal Stresses
　　　　　　Thermal Stresses and Thermal Fatigue (Proceedings of the International Conference held at Berkeley Castle, 22nd-26th September, 1969) pp. 66-80

17. 田中喜久昭, 石崎泰郎, 井上達雄
　　 降伏曲面の温度依存性に関する研究
　　　　　　 日本機械学会論文集, 第38巻, 第 314号 (昭和47年10月) 2439-2446頁

18. 井上達雄, 田中喜久昭, 青木正人
　　 ひずみ履歴を考慮した弾塑性熱応力の解析
　　　　　　　日本機械学会論文集, 第38巻, 第 314号 (昭和47年10月) 2490-2496頁

19. T. Inoue and K. Tanaka
　　 Temperature Dependent Analysis of Elasto-plastic Thermal Stresses by Finite Element Method
　　　　　　　Memoirs of the Faculty of Engineering, Kyoto University, Vol. 35, Part 1 (1973-1)
pp. 1-14

20. 井上達雄, 田中喜久昭
　　 変態を考慮した焼入れの解析
　　　　　　　材料, 第22巻, 第 234号 (昭和48年 3月) 218-223頁

21. 井上達雄, 田中喜久昭, 青木正人
　　 熱応力ラチェットの塑性力学的一考察
　　　　　　　材料, 第22巻, 第 234号 (昭和48年 3月) 224-228頁
　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　
22. T. Inoue, K. Tanaka and T. Ishizaki
　　 Yield Surfaces of Metals at Elevated Temperatures
　　　　　　　Proceedings of 16th Japan Congress on Materials Research, (1973-5) pp. 126-131

23. T. Inoue and K. Tanaka
　　 A Finite Element Formulation of the Coupled Thermoelastic-Plastic Problems　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　
　　　　　　　Memoirs of the Faculty of Engineering, Kyoto University, Vol. 35, Part 3 (1973-7)
pp. 251-261

24. 石崎泰郎, 岡部俊郎, 田中喜久昭, 井上達雄
　　 降伏曲面におよぼす温度と時間の影響について
　　　　　　　日本機械学会論文集, 第39巻, 第 325号 (昭和48年10月) 3010-3015頁




25. T. Inoue and K. Tanaka
　　 Mechanical Ratcheting under Multiaxial Stresses at Elevated Temperature
　　　　　　　Mechanical Behavior of Materials, Proceedings of the 1973 Symposium on Mechanical Behavior of Materials (1974) pp. 55-63

26. T. Inoue, K. Tanaka and M. Aoki
　　 Analytical Investigation on Thermal Stress Ratcheting
Mechanical Behaviour of Materials, Proceedings of the 1974 Symposium on Mechanical Behaviour of Materials, Vol. 2 (1975) pp. 227-236

27. 井上達雄, 猪狩敏秀, 田中喜久昭, 吉川正治
　　 多軸応力下の熱応力ラチェット
　　　　　　　材料, 第24巻, 第 258号 (昭和50年 3月) 215-220頁

28. T. Inoue and K. Tanaka
　　 Subsequent Yield Conditions of Metal under Cyclic Loading at Elevated Temperature
　　　　　　　Ingenieur-Archiv, Vol. 44, No. 2 (1975-2) pp. 53-62

29. T. Inoue and K. Tanaka
　　 An Elastic-plastic Stress Analysis of Quenching when Considering a Transformation
　　　　　　　International Journal of Mechanical Sciences, Vol. 17, No. 5 (1975-5) pp. 361-367

30. S. Yamamoto, M. Hayashi and T. Inoue
　　 Viscoelastic Analysis on Peel Adhesion of Adhesive Tape by Matrix Method
　　　　　　Jounal of Applied Polymer Science, Vol. 19, No. 8 (1975-8) pp. 2107-2118

31. T. Inoue and K. Takagi
　　 On Large Deflections of Elastic-Plastic Plates,
Bulletin de L'academie Polonaise des Sciences, Serie des Sciences Techniques, Vol. 24, No. 4 (1976-4) pp. 153-159

32. 井上達雄, 原口賢一, 木村茂人
　　 焼入れ・焼もどし過程の応力解析
　　　　　　　材料, 第25巻, 第 273号 (昭和51年 6月) 521-526頁

33. 田中喜久昭, 長岐 滋, 寺浦栄一, 井上達雄
　　 高温における多軸応力下の機械的ラチェット
　　　　　　　日本機械学会論文集, 第42巻, 第 358号 (昭和51年 6月) 1685-1691頁

34. B. Raniecki, 井上達雄
　　 鋼の焼入れにおける相変態と熱弾塑性応力
　　　　　　　材料, 第26巻, 第 289号 (昭和52年10月) 935-940頁

35. T. Inoue, K. Haraguchi and S. Kimura
　　 Analysis of Stresses due to Quenching and Tempering of Steel
　　　　　　　Transactions of the Iron and Steel Institute of Japan, Vol. 18, No. 1 (1978-1) pp. 11-15

36. 橋本信一, 井上達雄, 山田敏郎
　　 焼入れにおける残留応力と変形の解析
　　　　　　　材料, 第27巻, 第 296号 (昭和53年 5月) 422-426頁

37. T. Inoue and B. Raniecki
　　 Determination of Thermal-hardening Stresses in Steels by use of Thermoplasticity Theory
　　　　　　　Journal of the Mechanics and Physics of Solids, Vol. 26, No. 3 (1978-7) pp. 187-212


38. T. Inoue and S. Nagaki
　　 A Constitutive Modeling of Thermoviscoelastic-plastic Materials
　　　　　　　Journal of Thermal Stresses, Vol. 1, No. 1 (1978-9) pp. 53-61

39. 長岐 滋, 井上達雄
　　 内部変数を用いた粘弾−塑性体の構成式
　　　　　　　日本機械学会論文集, 第44巻, 第 387号 (昭和53年11月) 3705-3710頁

40. 上村啓二, 長岐 滋, 井上達雄
　　 鋼の焼入れにおける組織変化と熱弾塑性解析
　　　　　　　材料, 第27巻, 第 303号 (昭和53年12月) 1152-1157頁

41. 岸野孝信, 長岐 滋, 井上達雄
　　 鋼の焼入れにおける相変態、熱伝導および弾塑性応力
　　　　　　　材料, 第28巻, 第 312号 (昭和54年 9月) 861-867頁

42. 井上達雄, 長岐 滋, 河手崇男
　　 繰返し温度変化をうける粘弾−塑性内圧円管の変形
　　　　　　　日本機械学会論文集(A編), 第45巻, 第 399号 (昭和54年11月) 1435-1442 頁

43. T. Inoue and S. Nagaki
　　 Successive Deformation of Viscoelastic-plastic Tube Subjected to Internal Pressure under Temperature Cyclings
　　　　　　　Journal of Thermal Stresses, Vol. 3, No. 1 (1980-3) pp. 185-198

44. T. Inoue and K. Yamamoto
　　 Static and Cyclic Deformations of Quasihomogeneous Elastic-plastic Material 　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　
　　　　　　　Proceedings of 23rd Japan Congress on Materials Research, (1980-5) pp. 12-17

45. 門河昌弘, 長岐 滋, 井上達雄
　　 鋼の焼入れと低温焼もどしにおける組織変化と応力の解析
　　　　　　　材料, 第29巻, 第 327号 (昭和55年12月) 1173-1179頁

46. T. Inoue, S. Nagaki, T. Kishino and M. Monkawa
　　 Description of Transformation Kinetics, Heat Conduction and Elastic-plastic Stresses in the Course of Quenching and Tempering of Some Steels
　　　　　　　Ingenieur-Archiv., Vol. 50, No. 5 (1981) pp. 315-327

47. T. Inoue, S. Nagaki and S. Tabata
　　 A Constitutive Modelling of Time-dependent Plastic Material with Work-hardening and Recovery Effects
　　　　　　　Proceedings of the IUTAM Symposium on Physical Nonlinearities in Structural Analysis (1981) pp. 109-112

48. 井上達雄, 山本 勲
　　 高分子材料の非弾性変形に伴なうクレイジングのテンソル表示とその特性
　　　　　　　日本機械学会論文集(A編), 第48巻, 第 426号 (昭和57年 2月) 221-229 頁

49. T. Inoue, T. Sasaki and H. Matsui
　　 Damage Mechanics Approach to the Orientations of Slip Bands and Related Cracking in Polycrystalline Metals 　　　　　　　　　　　　　
　　　　　　　Proceedings of the 25th Japan Congress on Materials Research, (1982-3) pp. 37-42



50. 吉田 晃, 長岐 滋, 井上達雄
　　 金属材料の凝固過程における熱伝導と弾・粘塑性応力
　　　　　　　材料, 第31巻, 第 348号 (昭和57年 9月) 897-901頁

51. T. Inoue and Z.-G. Wang
　　 Finite Element Analysis of Coupled Thermoinelastic Problem with Phase Transformation
　　　　　　Proceedings of the International Conference on Numerical Methods in Industrial Forming Processes (1982-7) pp. 391-400

52. 王 志剛, 井上達雄
　　相変態の応力依存性を考慮した鋼の焼入れにおける温度、組織および応力の解析
　　　　　　　材料, 第32巻, 第 360号 (昭和58年 9月) 991-996頁

53. T. Inoue and Z.-G. Wang
　　　High-temperature Behaviour of Steels with Phase Transformation and the Simulation of Quenching and Welding Processes
　　　　　　　Proceedings of the 4th International Conference on Mechanical Behaviour of Materials (1982) pp. 1005-1011

54. 佐々木保, 柴 晴彦, 井上達雄
　　多結晶金属材料におけるすべり帯の方位分布に関する損傷力学的研究
　　　　　　　日本機械学会論文集(A編), 第50巻, 第 450号 (昭和59年 2月) 119-128 頁

55. 山口 豪, 王 志剛, 井上達雄
　　　歯車の焼入過程における温度、組織および応力の解析
　　　　　　　材料, 第33巻, 第 370号 (昭和59年 7月) 814-820頁

56. 王 志剛, 井上達雄
　　　溶融を考慮した粘塑性構成式とそれを用いた溶接過程の解析
　　　　　　　日本機械学会論文集(A編), 第50巻, 第 459号 (昭和59年11月) 1900-1908 頁

57. T. Inoue and Z.-G. Wang
　　Coupling Phenomena between Stress, Temperature and Metallic Structures in the Process with Phase Transformation
　　　　　　Proceedings of the International Symposium on Calculation of Internal Stresses in Heat Treatment of Metallic Materials, (1984-5) pp. 298-310

58. T. Inoue, Z.-G. Wang and T. Yamaguchi
　　　Quenching Stresses of Carburized Steel Gear considering Phase Transformation
　　　　　　　Proceedings of the International Symposium on Calculation of Internal Stresses in Heat Treatment of Metallic Materials, (1984-5) pp. 387-398

59. Z.-G. Wang and T. Inoue
　　　A Viscoplastic Constitutive Relationship with Phase Transformation and the Application to the Process of Welding
　　　　　　Proceedings of the International Symposium on Calculation of Internal Stresses in Heat Treatment of Metallic Materials, (1984-5) pp. 474-486

60. 山口 豪, 王 志剛, 井上達雄
　　　歯車の浸炭焼入過程における炭素濃度依存性を考慮した温度、組織および応力の解析
　　　　　　　材料, 第33巻, 第 375号 (昭和59年12月) 1470-1476頁




61. T. Inoue, S. Imatani and T. Sahashi
On the Plasticity-creep Interaction Behavior of SUS-304 Steel under Combined Stress State of Tension and Torsion
　　　　　　Proceedings of the 28th Japan Congress on Materials Research, (l985) pp. 15-22

62. 王 志剛, 井上達雄
　　　粘塑性体の構成式を用いた板の突合せ溶接過程の解析
　　　　　　　日本機械学会論文集(A編), 第51巻, 第 467号 (昭和60年 7月) 1858-1863 頁　

63. T. Inoue, T. Igari, F. Yoshida, A. Suzuki, S. Murakami
　　　Inelastic Behaviors of 2・1/4Cr-1Mo Steel under Plasticity-Creep Interaction Condition　
----　Results of Joint Work
　　　　　　　Transactions of the 8th International Conference on Structural Mechanics in Reactor
Technology, Brussels, Vol. L (1985-8), pp.49-56

64. T. Inoue, S. Imatani and T. Sahashi
　　　Some Remarks on the Inelastic Behaviour of High Temperature Materials under Biaxial Stress State
　　　　　　　Transactions of the 8th International Conference on Structural Mechanics in Reactor Technology, Brussels, Vol. L (1985-8) pp.7-14

65. T. Inoue, S. Imatani and T. Sahashi
　　　A Constitutive Model Relevant to the Description of Inelastic Behaviour of Steels under Plasticity-Creep Interaction Condition
　　　　　　　Proceedings of the International Conference on Nonlinear Mechanics, Shanghai (1985-10) pp. 536-541

66. Z.-G. Wang and T. Inoue
　　　A Viscoplastic Constitutive Relationship and the Application to Carburized Quenching and Welding Processes
　　　　　　　Proceedings of the International Conference on Nonlinear Mechanics, Shanghai (1985-10) pp. 657-662.

67. T. Inoue and Z.G. Wang
　　　Coupling between Stress Temperature and Metallic Structures during Processes Involving Phase Transformation
　　　　　　　Material Science and Technology, Vol. 1 (1985-10) pp. 845-850

68. T. Inoue, T. Yamaguchi and Z.G. Wang
　　　Stresses and Phase Transformations occurring in Quenching of Carburized Steel Gear Wheel
　　　　　　　Material Science and Technology, Vol. 1 (1985-10) pp. 872-876

69. Z.G. Wang and T. Inoue
　　　Viscoplastic Constitutive Relation Incorporating Phase Transformation ---- Application to Welding
　　　　　　　Material Science and Technology, Vol. 1 (1985-10) pp. 899-903

70. T. Inoue, T. Igari, F. Yoshida, A. Suzuki and S. Murakami
　　　Inelastic Behavior of 2・1/4Cr-1Mo Steel under Plasticity-creep Interaction Condition, An Interim Report of the Bench Mark Project by the Subcommittee on Inelastic Analysis and Life Prediction of High Temperature Materials, JSMS
Nuclear Engineering and Design, Vol.90 (1985-12) pp. 287-297
　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　
71. 芳賀裕和, 今谷勝次, 井上達雄
　　　高温多軸応力下におけるSUS304鋼の非弾性挙動に関する研究 (第 1報 パソコンを用いた制御システムの開発と実験結果)
　　　　　　　機械学会論文集(A編), 第52巻, 第 473号 (昭和61年 1月) 49-57 頁　　　　　　　　　　　　　　　　　　　　　　　　　　　

72. 芳賀裕和, 今谷勝次, 井上達雄
　　　高温多軸応力下におけるSUS304鋼の非弾性挙動に関する研究 (第 2報 非弾性構成式による解析と検討)
　　　　　　　機械学会論文集(A編), 第52巻, 第 473号 (昭和61年 1月) 58-66 頁　　　　　　　　　　　　　　　　　　　　　　　　　　　

73. 星出敏彦, 宮原光雄, 佐藤正人, 井上達雄
　　　き裂の合体・成長を考慮した平滑材における塑性疲労の寿命評価に関する研究
　　　　　　　機械学会論文集(A編), 第52巻, 第 474号 (昭和61年 2月) 406-411 頁　　　　　　　　　　　　　　　　　　　　　　　　　　

74. 佐橋稔之, 今谷勝次, 井上達雄
　　　塑性−クリープ相互作用下の非弾性構成式と 2　 Cr-1Mo 鋼の変形挙動に対する適用　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　
　　　　　　　機械学会論文集(A編), 第52巻, 第 476号 (昭和61年 4月) 1126-1133頁　　　　　　　　　　　　　　　　　　　　　　　　　

75. T. Inoue, S. Imatani and T. Sahashi
　　　Description of Creep-plasticity Interaction Behavior of High Temperature Steels under Combined Tension and Torsion
　　　　　　　Proceedings of the International Conference on Creep, Tokyo, (1986-4) pp. 453-458 　　　　　　　　　　　　　　　　　　　　

76. T. Inoue and Z.G. Wang
　　　Coupling between Temperature, Stress and Metallic Structures during Phase Transformation and the Analysis of Carburized Quenching of a Steel Gear
　　　　　　　Proceedings of the International Conference on Computational Mechanics, (1986-5)
pp.�W11- �W16

77. Z.G. Wang and T. Inoue
　　　Analysis of Temperature and Elastic-Viscoplastic Stresses during Continuous Casting Process
　　　　　　　Proceedings of the International Conference on Computational Mechanics, (1986-5)
pp.�[103-�[108

78. T. Inoue and T. Sasaki
　　　Orientation of Slip Bands in Polycrystalline Metal Subjected to Biaxial Stresses
　　　　　　　Proceedings of the International Symposium on Microstructure and Mechanical Behavior of Metals, Xi'an (1986-10) pp.61-70　
　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　
79. T. Inoue, T. Hoshide, T. Yoshikawa and Y. Kimura
　　Slip Band Behavior and Crack Initiation in Polycrystalline Copper under Multiaxial Low-cycle Fatigue ------ A Damage Mechanics Approach
　　　　　　　Journal of Engineering Fracture Mechanics, (Proceedings of IUTAM Symposium on Mechanics of Damage and Fatigues, Tel Aviv and Haifa), Vol.25 Nos.5/6 (1986-12) pp.665-675 　　

80. 宮尾光介, 王志剛, 井上達雄
　　　歯車の浸炭焼入過程における変態塑性を考慮した温度、組織および応力の解析
　　　　　　　材料, 第35巻, 第 399号 (昭和61年12月) 1352-1357頁

81. S. Imatani and T. Inoue
　　　Material Anisotropy induced by Prior Plastic Deformation
　　　　　　　Proceeding of the 2nd International Conference on Constitutive Laws for Engineering Materials ----- Theory and Applications, (Tucson) (1987-1) pp.573-580

82. T. Hoshide, M. Miyahara and T. Inoue
　　　Life Prediction based on Analysis of Crack Coalescence in Low Cycle Fatigue 　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　
　　　　　　　Engineering Fracture Mechanics, Vol.27 No.1 (1987-1) pp.91-101


83. 吉川哲也, 木村幸雄, 星出敏彦, 井上達雄
　　　多軸応力下の低サイクル疲労におけるひずみ経路の変化による損傷の蓄積とき裂発生の解析
　　　　　　　機械学会論文集(A編), 第53巻, 第 487号 (昭和62年 3月) 361-368 頁

84. T. Inoue
Metallo-thermo-mechanical Coupling --- Application to the Analysis of Quenching, Welding and Continuous Casting Processes
　　　　　　　Berg- und Huttenmannische Monatshefte, Vol.132, No.3, (1987-5) pp.63-71

85. T. Inoue, Z.G. Wang and K. Miyao
　　　Simulation of Quenching Process of Carburized Steel Gear Wheel under Metallo-thermo-mechanical Coupling
　　　　　　　　Thermomechanical Coupling in Solids, Proceedings of IUTAM Symposium on　
Thermomechanical Coupling in Solids, Paris, pp.257-262 (1987-5), Elsevier Science Publishers, B.V., North-Holland

86. T. Inoue, T. Hoshide, T. Yoshikawa and Y. Kimura
　　　A Damage Mechanics Approach to Crack Initiation in Polycrystalline Copper under Multiaxial Low Cycle Fatigue 　　　　　　　　　　　　　　
　　　　　　　Proceeding of the 5th International Conference on Mechanical Behavior of Materials, Beijing, (1987) pp.651-658
　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　
87. Z.G. Wang and T. Inoue
　　Steady State Analysis of Temperature and Stress incorporating Solidification during Continuous Casting Process
　　　　　　　Proceeding of the 5th International Conference on Mechanical Behavior of Materials. Beijing, (1987) pp.1131-1138

88. T. Inoue, N. Ohno, A. Suzuki and T. Igari
　　　Evaluation of Inelastic Constitutive Models under Plasticity-creep Interaction for 2.1/4Cr-1Mo Steel, Results of Joint Work (A)
　　　　　　Proceeding of the 9th International Conference on Structural Mechanics in Reactor Technology, Lausanne, Vol.L (1987-8), pp.15-26

89. T. Inoue, T. Igari, M. Okazaki, M. Sakane and K. Tokimasa
　　　Fatigue-creep Life Prediction of 2.1/4Cr-1Mo Steel by Inelastic Analysis ----Results of Joint Work (B)
　 Proceeding of the 9th International Conference on Structural Mechanics in Reactor Technology, Lausanne, Vol.L (1987-8), pp.261-266

90. T. Inoue, S. Imatani and T. Segawa
　　　On the Temperature and Rate-dependence of Inelastic Behaviors of Metals
　　　　　　 Proceeding of the 9th International Conference on Structural Mechanics in Reactor Technology, Lausanne, Vol.L (1987-8), pp.3-13

91. T. Inoue and Z.G. Wang
　　　Inelastic Analysis of Quenching, Welding and Continuous Casting considering Metallo-thermo-
mechanical Coupling 　　　　　　　　　　　
　　　　　　Proceeding of the 9th International Conference on Structural Mechanics in Reactor Technology, Lausanne, Vol.L (1987-8), pp.189-194

92. 王志剛, 田中誠, 井上達雄
　　　物質移動を考慮した連続鋳造過程の解析 第 1報: 温度場の解析
　　　　　　機械学会論文集(A編), 第53巻, 第492 号 (昭和62年 8月), 1735-1738 頁




93. 王志剛, 井上達雄
　　　物質移動を考慮した連続鋳造過程の解析 第 2報: 変形と応力場の解析
　　　　　　機械学会論文集(A編), 第53巻, 第492 号 (昭和62年 8月), 1739-1742 頁

94. T. Inoue and S. Imatani
　　　Inelastic Constitutive Relationship of High Temperature Materials under Plasticity-creep Interaction Condition 　　　　　　　　　　　　
　　　　　　　Current Japanese Materials Research, Vol.3 "High Temperature Creep and Fatigue" (1987) pp. 1-20
　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　
95. T. Hoshide, M. Miyahara and T. Inoue
　　　Elastic-plastic Behavior of Short Fatigue Crack in Smooth Specimen
　　　　　　　Basic Questions in Fatigue, Vol.1 (eds. J.T. Fong and R.J. Fields), Special Technical Report No.924, American Society Testing Material (1988) pp.312-322

96. T. Inoue and Z.G. Wang
Thermal and Mechanical Fields in Continuous Casting Slab ----- A Steady State Analysis I incorporating Solidification
　　　　　　　Ingenieur-Archiv, 58-4 (1988) pp.265-275

97. 星出敏彦, 河端享介, 井上達雄
二軸応力下の低サイクル疲労における粒界形き裂の成長の解析
　　　　　　　機械学会論文集(A編), 第55巻, 第510 号 (平成元年 2月), 222-230 頁

98. 巨東英，井上達雄，吉原直武，
　　　アルミニウム合金丸棒の半連続鋳造過程のシミュレーション
　　　　　　　機械学会論文集(A編)，第55巻，第513号（平成元年5月, 1236-1242頁．

99. S. Imatani and T. Inoue
Anisotropy and Plastic Flow of Metallic Materials
Proceedings of 32nd Japan Congress on Materials Research, (1989-6) pp.284-289

100. T. Inoue, Z. G. Wang and K. Miyao,
Thermal and Phase Transformation Stresses in a Carburized Quenched Gear Wheel
Proceedings of the 32nd Japan Congress on Materials Research, (1989),pp.21-26

101. 星出敏彦, 河端享介, 山川倫央, 井上達雄
　　　 二軸応力下の弾塑性疲労き裂の伝ぱ挙動
材料, 第38巻, 第426号 (平成元年3月) 280-286頁

102. 辰己尚久, 王　志剛, 井上達雄
連続鋳造過程における温度場および凝固シェルの弾塑性応力場のシミュレーション
機械学会論文集(A編), 第55巻, 第514号 (平成元年6月) 1389-1393頁

103. S. Imatani and T. Inoue
Effects of Induced Anisotropy on the Plastic Behavior of Metals
Advances in Plasticity - 1989, Proceedings of Plasticity '89, The Second International
Symposium on Plasticity and its Current Applications, Tsu-Mie (1989-7) pp.227-230

104. T. Inoue and H. Sanari
Simulation of Temperature and Inelastic Stresses in a Solidifying Slab during Twin-roll Casting Process
Advances in Plasticity - 1989, Proceedings of Plasticity '89, The Second International
Symposium on Plasticity and its Current Applications, Tsu-Mie (1989-7) pp.57-69


105. S. Imatani, M. Teraura and T. Inoue
A Viscoplastic Constitutive Model based on Anisotropic Yield Criterion Weld Residual Stresses and Plastic Deformation,
Proceedings of the 1989 ASME Pressure Vessels and Piping Conference, PVP-Vol.163, Honolulu, Hawai (1989-7) pp.27-32

106. T. Inoue, F. Yoshida, N. Ohno, M. Kawai, Y. Niitsu and S. Imatani
Plasticity-creep Behavior of 2 1/4Cr-1Mo Steel at 600℃ in Multiaxial Stress State: Benchmark
Project (A) by IALIPS
Structural Design for Elevated Temperature Environments ---- Creep, Ratchet, Fatigue and Fracture, Proceedings of the 1989, ASME Pressure Vessels and Piping Conference, PVP-Vol.163, Honolulu, Hawai (1989-7) pp.101-107

107. T. Inoue, M. Okazaki, T. Igari, M. Sakane and S. Kishi
Fatigue-creep Life Prediction of 2 1/4Cr-1Mo Steel at 600℃ in Multi-axial Stress State: Benchmark Project (B) by IALIPS
Structural Design for Elevated Temperature Environments - Creep, Ratchet, Fatigue and Fracture, Proceedings of the 1989, ASME Pressure Vessels and Piping Conference, PVP-Vol.163, Honolulu, Hawai (1989-7) pp.109-114

108. T. Inoue and S. Imatani
A Unified Inelastic constitutive Equation in Terms of An sotropic Yield Function
Transactions of the 10th International Conference on Structural Mechanics in Reactor Technology, Vol.L, Anaheim-California, (1989-8) pp.1-6

109. T. Inoue
Benchmark Project on Inelastic Deformation and Life Prediction of 2・1/4Cr-1Mo Steel under Multiaxial Stresses
Transactions of the 10th International Conference on Structural Mechanics in Reactor Technology, Vol.L, Anaheim-California, (1989-8) pp.141-152

110. T. Inoue, N. Ohno, A. Suzuki and T. Igari
Evaluation of Inelastic Constitutive Models under Plasticity-creep Interaction for 2・1/4Cr-1Mo Steel --- Task (A) of the Benchmark Project by the Subcommittee on Inelastic Analysis and Life Prediction of High Temperature Materials, JSMS
Nuclear Engineering and Design, 114 (1989) pp.295-309

111. T. Inoue, T. Igari, M. Okazaki, M. Sakane and K. Tokimasa
Fatigue-creep Life Prediction of 2・1/4Cr-1Mo Steel by Analysis ---- Task (B) of the Benchmark Project by the Subcommittee on Inelastic　Analysis and Life Prediction of High Temperature Materials, JSMS
Nuclear Engineering and Design, 114 (1989) pp.311-321

112. T. Inoue, D.Y. Ju and N. Yoshihara
Temperature and Viscoplastic Stresses during Vertical Semi-continuous Direct Chill Casting of Aluminum Alloy
Proceeding of the 2rd International Conference on Residual Stresses, Nancy 1988-11, pp.523-528, Elsevier

113. T. Inoue, Z.G.Wang and K. Miyao
Quenching Stress of Carburized Steel Gear Wheel
Proceeding of the 2rd International Conference on Residual Stresses, Nancy 1988-11, pp.606-611, Elsevier





114. 星出敏彦、佐藤直　、井上達雄
　 　　 セラミックスの保証試験後の疲労特性に関する研究 　（第１報　理論的解析）
　　　　　　　　機械学会論文集（Ａ編）、第56巻、第522号（平成2年2月）212ｰ219頁

115. 星出敏彦、佐藤直哉、大原徹雄、井上達雄
　　　 セラミックスの保証試験後の疲労特性に関する研究 　（第２報　実験的検討）
　　　　　　　　機械学会論文集（Ａ編）、第56巻、第522号（平成2年2月）220ｰ223頁

116. 星出敏彦、横田浩嗣、井上達雄
　　　 組み合せ荷重を受ける純銅の環状切欠き材の疲労における微小き裂の成長挙動と寿命特性に関する研究　　
　　　 　　　材料、第39巻、第437号（平成2年2月）144-149頁
　
117. 星出敏彦、望月正人、井上達雄
　　 　爆発溶射によるセラミックス・コーティング材における被膜の二軸応力下での破壊特性
　　　 　　　材料、第39巻、第39号（平成2年4月）387-392頁

118. D.Y. Ju, T. Inoue, and N. Yosihara
Solidification Mode and Viscoplastic Stress in Aluminum Cylinder during Vertical Semi-Continuous Direct Chill Casting Process
Proceeding of the 3rd International Conference on Technology of
Plasticity, Kyoto, July 1-6 (1990), pp.1095-1100

119. 佐成弘毅，井上達雄
双ロール形薄板連続鋳造過程シミュレーション，
(第１報，凝固と温度の解析と実験による検証），
　　　　 機械学会(A編)，第56巻，第524号，（平成２年４月），984-989頁．

120. 佐成弘毅，井上達雄
双ロール形薄板連続鋳造過程シミュレーション，
　　　（第２報，鋼に対する凝固と温度および非弾性応力の解析），
　　　　 機械学会(A編)，第56巻，第524号，（平成２年４月），990-996.

121. T. Hoshide and T. Inoue
A Modeling of Cracking Behavior in multiaxial low Cycle Fatigue and its Application to Life Assessment
Fatigue-90: Proceedings of the 4th International Conference on Fatigue and Fatigue Thresholds, July 15-20, 1990, Hawai, pp.2161-2166, Materials and Components Engineering Publication.

122. S. Imatani, M. Teraura and T. Inoue
An Isotropic Yield Function accounting for History Effects
Proceedings of the IUTAM/ICM Symposium on Yielding, Damage, and Failure of Anisotropic Solids (1990) pp.729-745

123. T.Inoue and Z.G. Wang
Metallo-Thermo-Mechanical Simulation of Some Processes incorpo-rating Phase Transformation 　
　　　　　　　Current Japanese Materials Research, Vol.7 "Computational Plasticity" (1990) pp.75-96


124. 巨　東英，大鹿容祐，井上達雄
　　　 遠心鋳造過程における凝固および温度場のシミュレーション，
　　　　　 　　材料，第40巻，449号（1991-2）144-150頁

125. T. Hoshide and T. Inoue
Simulation of Anomalous Behavior of a Small Flaw in Strength of Engineering ceramics
Engineering Fracture mechanics, Vol. 38, No. 4/5 (1991) pp.307-312

126. 星出敏彦，奥村和雅，井上達雄
　　　 窒化ケイ素の曲げ強度に及ぼす研削加工の影響に関する実験的検討と数値シミュレーション
　　　　　　　 材料，40巻，449号，（1991ｰ2）217ｰ223頁

127. 巨 東英，井上達雄
双ロール形連続鋳造過程における凝固および粘塑性変形の挙動，
　　　　　　　 機械学会論文集 (A編)，第57巻，第537号（1991-5）1147-1154

128. T. Inoue and D.Y. Ju
　Thermomechanical Simulation of Some Types of Steady Continuous Casting Processes,
Advances in Continuum Mechanics [39 Papers from International Experts Dedicated to Horst Lippmann ed. O. Bruller, V. Mannl and J. Najar, Springer-Verlag, 1991, pp.389-406

129. T. Inoue, F. Yoshida, N. Ohno, M. Kawai, Y. Niitsu and S. Imatani
Evaluation of Inelastic Constitutive Models under Plasticity-creep Interaction in Multiaxial Stress State --- The Second Report of the Benchmark Project (A) by the Subcommittee on Inelastic Analysis and Life
Prediction of High Temperature Materials, JSMS Nuclear Engineering and Design, 126, 1(1991) pp.1-11

130. T. Inoue, M. Okazaki, T. Igari, M. Sakane and S. Kishi
Evaluation of Fatigue-creep Life Prediction Methods in Multiaxial Stress State --- The Second Report of the Benchmark Project (B) by the Sub-committee on Inelastic Analysis and Life Prediction of High Temperature Materials, JSMS
Nuclear Engineering and Design, 126, 1(1991) pp.13-21

131. T. Inoue and D.Y. Ju
Heat Flow and Inelastic Stresses incorporating Solidification ---An Application to Strip Casting Process by Twin Roll Method----
Proceedings of the Sixth International Conference on Mechanical Behaviour of Materials(ed. by M.Jono and T. Inoue), July 29-August 2, 1991, Kyoto, pp.177-182

132. S. Imatini, K. Kokubo and T. Inoue
Rate Dependent Stress/strain Response of a Notched Cylinder
Proceedings of the Sixth International Conference on Mechanical Behaviour of Materials(ed. by M.Jono and T. Inoue), July 29-August 2, 1991, Kyoto, pp.793-798

133. T. Hoshide, N. Sato and T. Inoue
Proof Testing of Ceramic Materials Subjected to Cyclic Loading
Proceedings of the Sixth International Conference on Mechanical Behaviour of Materials(ed. by M.Jono and T. Inoue), July 29-August 2, 1991, Kyoto, pp.691-696

134. T. Inoue,
Benchmark Project on the Evaluation of Inelastic Constitutive Models and Fatigue-creep Life Prediction Methods for 2.1/4Cr-1MoSteel --- An Application to Finite Element Implementation---
Proceedings of the Sixth International Conference on mechanical Behaviour of Materials(ed. by M.Jono and T. Inoue), July 29-August 2, 1991, Kyoto, pp.261-266




135. Toshihid Igari, Masafumi Yamaguchi, Toshiro Matsubara, Shinichi Nnmura
Cyclic stress-strain behavior and creep-fatigue life prediction of perforated plates,
Proceedings of the 6th International Conference on Mechanical Behavior of
Materials, Vol.2 (1991) pp. 317-322

136. T. Inoue, S. Imatani and M. Tanaka
A Viscoplastic Constitutive Relationship and the Finite Element Implementation of Stress/strain Cocentrartion in Notched Component
Creep in Strucures ---- Proceedings of the 4th IUTAM Symposium on Creep in Structures , Cracow, Poland, September 10-14, 1991, (ed. M. Zyczcowski), Springer, pp.587-594

137. T. Inoue, F. Yoshida, Y. Niitsu, N. Ohno T. Uno and A. Suzuki
Inelastic Stress/Strain Response of 2.1/4Cr-1Mo Steel under Combined Tension-Torsion at 600℃
Transactions of the 11th international Conference on Structural Mechanics in Nuclear Technology (ed. H. Shibata), August 18-23, 1991, Tokyo, Vol. L, pp.1-12 　


138. T. Inoue, S. Kishi, H.Koto and Y. Takahashi
Fatigue-Creep Life Prediction of 2.1/4Cr-1Mo Steel under Combined Tension-Torsion at 600℃
Transactions of the 11th international Conference on Structural Mechanics in Nuclear Technology (ed. H. Shibata), August 18-23, 1991, Tokyo, Vol. L, pp.13-18 　

139. T. Inoue, S. Imatani, Y. Fukuda, K. Aoto and K. Tamura
Inelastic Sress/Strain Behavior near Circumferential Notch Root of 2.1.4 Cr-1Mo Steel at 600℃
Transactions of the 11th international Conference on Structural Mechanics in Nuclear Technology (ed. H. Shibata), August 18-23, 1991, Tokyo, Vol. L, pp.19-24

140. T. Inoue, M. Sakane, Y. Fukuda, T. Igari and M. Miyahara
Fatigue-Creep Life Prediction for Notched Specimen of 2.1/4 Cr-1Mo Steel at 600℃
Transactions of the 11th international Conference on Structural Mechanics in Nuclear Technology (ed. H. Shibata), August 18-23, 1991, Tokyo, Vol. L, pp.24-30

141. T. Inoue, S. Imatani and K. Kokubo
Inelastic Stress/Strain Concentration of Circumferential Notched Bar subjected to Tension and Torsion
　 Inelastic Analysis, Fracture and Life Prediction: Proceedings of the 8th International Seminar on Inelastic Analysis, Fracture and Life Prediction , held in conjucation with the 11th International Conference on Structural Mechanics in Reactor Technology, Keidanren Guest House, ShizuokaPrefecture, Aug. 26-27, 1991, pp.51-69

142. 小久保一之，今谷勝次，井上達雄
統一型非弾性構成式を用いた切欠材の変形挙動の有限要素解析
　　　　　　　 機械学会論文集 (A編)，第58巻，第545号（1992-1）112-117頁

143. T. Inoue　and D.Y. Ju
Simulation of Solidification and Viscoplastic Stresses during Vertical Semi-continueous Direct Chill Casting of Aluminum Alloy
International Journal of Plasticity, Vol.8, No.2 (1992) pp.161-183

144. T. Inoue and D.Y. Ju
Analysis of Solidification and Viscoplastic Stresses incorporating a Moving Boundary: An Application to Simulation of the Centrifugal Casting Process
J. Thermal Stresses, Vol.15, No.1 (1992) pp.109-128



145. Dong-Ying Ju and Tatsuo Inoue
　　　 Simulation of Solidification and Evaluation of Residual Stresses during Centrifugal Casting Process,
　　　　　　　 Residual Stresses - �V, Science and Technology, Proceedings of the 3rd International Conference on Residual Stresses, July 23-26, 1991, Tokushima, pp. 220-226
　　
146. Tatsuo Inoue, Kyozo Arimoto and Dong-Ying Ju
Development of Heat Treatment Simulation Program "HEARTS" − Theory, Strategy, Function and Some Examples −
　　　　　　　 Residual Stresses - �V, Science and Technology, Proceedings of the 3rd International Conference on Residual Stresses, July 23-26, 1991, Tokushima, pp. 226-231

147. 巨　東英，武村伸介，井上達雄
　　　 遠心鋳造における凝固と応力の連成解析
　　　　　　　 材料，41巻464号（平成４年５月），pp.751-757

148. 松井英之，巨　東英，井上達雄
　　　　超高温におけるSUS304鋼の非弾性特性と統一型構成式
　　　　　　　 材料，41巻466号（平成４年７月），pp.1153-1159

149. Mamoru Mizuno, Toru Matsuoka and Tatsuo Inoue
Processing of Metal Matrix Composite by Centrifugal Casting Technique ----Experimant and Simulation
Proceedings of 1992 Sino-Japan Bilateral Symposium on High Temperature Strength of Materials, August 19-21, 1992, Luoyang, pp.107-115, The Chinese Mechanical Engineering Society

150. Toshikiko Hoshide, Takato Ogaki and Tatsuo Inoue
A Modeling of Fatigue Crack Growth in Notched Specimen subjected to Complex Stresses and its Application to Life Assessment
Proceedings of the 3rd International Conference on Low Cycle Fatigue and Elasto-plastic Behaviour of Materials, September 7-11, 1992, Berlin, pp.3556-361

151. Tatsuo Inoue, Kyozo Arimoto and Dong-ying Ju
　　　　Metallo-thermo-mechanical Simulation of Quenching Process --- Theory, and Implementation of Computer Code "HEARTS" ---
Proceedings of the first International Conference on Quenching and Control of Distorsion, Chicago, September 22-25, 1992, pp. 205-212 　　

152. 星出敏彦，熊谷香太郎，井上達雄
　　　　爆発溶射によるセラミック被膜の形成過程における温度場と応力場の解析
　　　　　　　 機械学会論文集 (A編)，第58巻，第554号（1992-10）1869-1874頁
　　　　　
153. Tatsuo Inoue, Toshihiko Hoshide and Kotaro Kumagai
Thermo-Mechanical Simulation of Ceramic Coating Process
Proceedings of the 8th International Congress on Haet Treatment of Materials, Kyoto, November 17-20, 1992, Kyoto, pp.345-348

154. Tatsuo Inoue, Kyozo Arimoto and Dong-ying Ju
Theory and Implementation of Heat Treatment Simulation Program "HEARTS"
Proceedings of the 8th International Congress on Heat Treatment of Materials, Kyoto, November 17-20, 1992, Kyoto, pp.569-572

155. 星出敏彦，垣内栄作，井上達雄
　　　　組合せ繰返し荷重下の切欠き材における分布微小き裂のモデル化に基づいた余寿命評価
　　　　　　　材料，42巻，472号（平成５年１月），pp．29ｰ34
156. Toshihiko Hoshide, Eisaku Kakiuchi and Tatsuo Inoue
Evaluation of Residual fatigue Life based on Image-processed Crack Distribution in Notched Component under Combined Axial-Torsional Loadings
Proceedings of the 36th Japan Congress on Materials Research, 1993-3, pp.73-78

157. Dong-ying Ju, Tatsuo Inoue and Hideyuki Matsui
Visco-plastic Behaviour of SUS304 Stainless Steel at Ultra-high Temperature --- Description by Unified Constitutive Models
Advances in Engineering Plasticity and its Applications, Proceeedings of the Asia-Pacific Symposium on Advances in Engineering Plasticity and its Applications --- AEPA '92, Hong-Kong, Dec. 15-17, 1992 (ed. W.B. Lee), Elsevier, pp.521-528.

158. Tatsuo Inoue, Dong-ying Ju and Kyozo Arimoto
Effect of Transformation Plasticity on the Metallo-Thermo-Mechanical Simulation of Quenchingq Process
Advances in Engineering Plasticity and its Applications, Proceeedings of the Asia-Pacific Symposium on Advances in Engineering Plasticity and its Applications --- AEPA '92, Hong-Kong, Dec. 15-17, 1992 (ed. W.B. Lee), Elsevier, pp.979-984.

159. Tatsuo Inoue
The Japanese Sword --- Metallo-Thermo-Mechanical Simulation of Quenching process ---
Macro/Micro/Meso Mechanical Propertiess of Materials --- Proceedings of IMMM'93, International Seminar on Microstructures and Mechanical Properties of New Engineering Materials, Tsu, Aug. 3-5, 1993 (ed. Masataka Tokuda, Bingye Xu and Masafumi Senoo) pp. 515-522.

160. Mamoru Mizuno and Tatsuo Inoue
Simulation of Damaging Process on the Interface between Matrix and Reinforcement in Metal Matrix Composite
Mechanical Macro/Micro/Meso Mechanical Propertiess of Materials --- Proceedings of IMMM'93, International Seminar on Microstructures and Mechanical Properties of New Engineering Materials, Tsu, Aug. 3-5, 1993 (ed. Masataka Tokuda, Bingye Xu and Masafumi Senoo) pp.591-598.

161. 水野　衛，松岡　徹，井上達雄
　　　　遠心鋳造法による金属基複合材料の創成と強化材分布の評価
　　　　　　　 材料，42巻，480号（平成５年９月）1048ｰ1051

162. 巨　東英，井上達雄
　　　　凝固を伴う熱・流れの解析と薄板連続鋳造への応用
　　　　　　　 機械学会論文集 (A編)，第59巻，第565号（1993-9）2189-2195頁
　　　　　　　　
163. Tatsuo Inoue and Kyozo Arimoto
Implementation of Heat Treatment Simulation Program "HEARTS" and Some Simulated Results
Proceedings of the CRC Conference on Super Computers at Work, September 20-23, 1993, Kyoto, pp. 1-6

164. Mamoru Mizuno, Toru Matsuoka and Tatsuo Inoue
Simulation of Centrifugal Casting Process of Metal Matrix Composite
Proceedings of International Conference on Computer-assisted Materials Design and Process Simulation, 1993-9, Tokyo, pp.30-35

165. Dong-Ying Ju and Tatsuo Inoue
Simulation of Solidification and Heat Flow in Strip Casting Process by Twin Roll Method
Proceedingd of International Conference on Computer-assisted Materials Design and Process Simulation, 1993-9, Tokyo, pp.84-89

166. Tatsuo Inoue, Kyozo Arimoto and Dong-Ying Ju
Computer Simulation of Quenching Process based on Metallo-Thermo-Mechanics
Proceedings of International Conference on Computer-assisted Materials Design and Process Simulation, 1993-9,Tokyo, pp.159-164

167. Mamoru Mizuno and Tatsuo Inoue
Simulation of Inelastic Deformation and Failure of MMC Composite considering Debonding of Interface,
Proceedings of 4th International Symposium on Plasticity and its Current Application, 1993, Baltimore,

168. Tatsuo Inoue and Dong-Ying Ju
Thermo-mechanical Simulation of Solidification Process --- Application to Continous and Centrifugal Casting ---
Proceeedings of 4th International Symposium on Plasticity, Baltimore, July 1993

169. Tatsuo Inoue, Takahiro Ohmori, Takao Hanabusa and Haruo Fujiwara
Simulation and Experiments of Quenching Process of the Japanese Sword
Proceedings of 4th International Conference on Residual Stresses, June 8-10, 1994, Baltimore, pp.970-976

170. Tatsuo Inoue, Toshihiko Hoshide and Eisuke Kakiuchi
Fatigue Life Evaluation of Notched Component under Combined Axial-Torsional Loading
Proceedings of 4th International Conference on Biaxial/Multiaxial Fatigue, May 31-June 3, 1994, Paris

171. Tatsuo Inoue
Materio-Thermo-Mechanics ----- Application to the Simulation of Engineering Processes incorporating Phase Transformation
Proceedings of the First Asia-Oceania International Symposium on Plasticity, August 16-19, 1994, Beijing (ed. by Wang Tzuchiang and Xu Bingye), Peking University Press,(1994) pp.51-57

172. 佐久間　淳，井上達雄
　　　　加熱・冷却過程の拡散形相変態のカイネティックスと溶接過程のシミュレーションへの摘用
　　　　　　　 機械学会論文集 (A編)，第60巻，第575号（1994-7）1624-1631頁

173. T. Inoue, F. Yoshida, Y. Niitsu, N. Ohno T. Uno and A. Suzuki
Inelastic Stress-strain Response of 2.1/4Cr-1Mo Steel under Combined Tension-Torsion at 600℃
Nuclear Engineering and Design, 150-2(1994), pp. 107-118

174. T. Inoue, S. Kishi, H. Koto and Y. Takahashi
Fatigue-Creep Life Prediction of 2.1/4Cr-1Mo Steel under Combined Tension-Torsion at 600℃
Nuclear Engineering and Design, 150-2(1994), pp. 119-127

175. T. Inoue, S. Imatani, Y. Fukuda, K. Aoto and K. Tamura
Inelastic Sress-strain Responscee for Notched Specimen of 2.1.4 Cr-1Mo Steel at 600℃
Nuclear Engineering and Design, 150-2(1994), pp. 129-139

176. T. Inoue, M. Sakane, Y. Fukuda, T. Igari, M. Miyahara and M. Okazaki
Fatigue-Creep Life Prediction for a Notched Specimen of 2.1/4 Cr-1Mo Steel at 600℃
Nuclear Engineering and Design, 150-2(1994), pp. 141-149

177. 有本享三，生田文昭，井上達雄
　　　　高周波焼入れ・焼戻し変形の有限要素法による連成シミュレーション
　　　　　　熱処理，34巻，6号(1994.12) PP.332-338

178. 井上達雄，有本享三
　　　　変態・熱．力学に基づいた熱処理シミュレーション用ＣＡＥシステム"HEARTS"の開発と応用　
材料，44巻，496号，（1995ｰ1）pp.103-109

179. 上原拓也，井上達雄，
　　　　日本刀の焼入れにおける焼刃土の効果
材料，44巻，498号，（1995ｰ3）pp.309ｰ315

180. 佐久間　淳，井上達雄
　　　　SUS304鋼の溶接過程における熱影響部の組織変化と粘塑性応力のシミュレーション　
機械学会論文集, 94巻, 583号　（1995ｰ3）pp.620ｰ625

181. Mamoru Mizuno, Koji Tanaka and Tatsuo Inoue
Simulation of Debonding on the Interface and Subsequent Creep Crack Growth in the Matrix for Metal Matrix Composite
　 Materials Science Research International, Vol.1, No.1, (1995-3) pp.17-22

182. Tatsuo Inoue and Atsushi Sakuma
Metallo-Thermo-Mechanics in Welding Process
Proceedings of 1st International Symposium on Thermal stresses and Related Topics, 1995.6.5-7, Hamamatsu, pp.521-524

183. Atsushi Sakuma and Tatsuo Inoue
Analysis of Flow, Deformation and Stresses in Melting/Solidification Process of Welding by Viscoplastic Constitutive Equation
　　　 　 Dynamic Plasticity and Structural Behaviors, Proceeding of 5th International Symposium on Plasticity and its Current Applications, July 17-21, 1995, Sakai-Osaka, pp.721-724

184. Tatsuo Inoue, Takuya Uehara and Y. Nakano
Metallo-Thermo-Mechanical Simulation of Quenching and Tempering of Japanese Sword
　　 　　 Dynamic Plasticity and Structural Behaviors, Proceeding of 5th International Symposium on Plasticity and its Current Applications, July 17-21, 1995, Sakai-Osaka, pp.697-700

185. Mamoru Mizuno, Toru Matsuoka Kenichiro Abe and Tatsuo Inoue
Simulation for Processing of Metal Matrix Composite by Centrifugal Casting Technique
Proceedings of the Symposium on Novel Technique in Synthesis and Processing of Advanced Materials, ASM, 1995 pp.405-418

186. Toshihiko Hoshide, Takatoshi Hirota and Tatsuo Inoue
Fatigue Behavior in Notched Components of (α+β) and β Titanium Alloys under Combined Axial-torsional Loading
Materials Science Research International Vol.1, No.3,(1995.9) pp.169-174

187. Tatsuo Inoue and Takuya Uehara
The Japanese Sword: Computer Simulation of Quenching Process
Proceedings of the International Symposium on Phase Transformations during the Thermal/Mechanical Processing of steel, The Metallurgical Society of the Canadian Institute of Mining, Metallurgy and Petroleum, August 1995, Vancouver, pp.521-524

188. Dong-Ying Ju and Tatstuo Inoue
Metallo-thermo-mechanical Simulation of Centrifugal Casting Process of Multi-layer Roll
Materials Science Research International, Vol.2, No.1 (1996-3) pp.18-25


189. Toshihiko Hoshide, Kenji Hayashi, Takahiro Saito, Kazumitsu Katsuki and Tatsuo Inoue
Mechanical Properties of Borosilicate Glass Coated with Alumina by Sputtering Process
Materials Science Research International, Vol.2, No.1 (1996-3) pp.33-38

190. 佐久間淳，井上達雄
　　　　溶融・凝固による移動境界問題の粘塑性構成式を用いた固相-液相の連成解析
　　　　（第１報；問題のモデル化と基礎式，有限要素式）
　　　　　　機械学会論文集，Ａ編，62巻，596号（1996.4）pp.1025-1031

191. 佐久間淳，井上達雄
　　　　溶融・凝固による移動境界問題の粘塑性構成式を用いた固相-液相の連成解析
　　　　（第２報；溶接過程のシミュレーションへの適用）
　　　　　　機械学会論文集，Ａ編，62巻，596号（1996.4）pp.1032-1037

192. 巨　東英，佐橋真人，大森隆弘，井上達雄
　　　　変態-熱-力学に基づく焼入れ・焼もどしのシミュレーションとその検証
材料，45巻，6号，（1996ｰ6）pp.643-649

193. Mamoru Mizuno and Tatsuo Inoue
Simulation of Damaging Interface between Matrix and Reinforcement in Metal Matrix Composite
Proceedings of the third Asia-Pacific Symposium on Advances in Engineering Plasticity and its Applicatios---AEPA '96, (ed. T.Abe and T. Tsuta), August 21-24 1996, Hiroshima, pp.321-326,
Pergamon Press

194. Kyozo Arimoto and Tatsuo Inoue
Development Strategy of CAE System "HEARTS" and Some Results of Heat Treatment Simulation
Proceedings of the third Asia-Pacific Symposium on Advances in Engineering Plasticity and its Applicatios---AEPA '96, (ed. T.Abe and T. Tsuta), August 21-24 1996, Hiroshima, pp.647-652,
Pergamon Press

195. Tatsuo Inoue, Hiroyuki Inoue,Takuya Uehara, Fumiaki Ikuta, Kyozo Arimoto and Toshihide Igari
Simulation and Experimantal Verification of Induction Hardening Process for Some Kinds of Steel
Proceedings of the Second　International Conference on Quenching and Control of Distortion, Cleveland, Nov.4-7,1996.pp.55-62

196. Tatsuo Inoue
Metallo-Thermo-Mechanics----Application to Phase Transformation incorporated Processes
Transactions of JWRI, Special Issue on Theoretical Prediction in Joining and Welding, Vol.25, No.2(1996) pp.69-87

197. Dong-Ying Ju, M. Sahashi, T. Ohmori and Tatsuo Inoue
Residual stresses and Distortion of a Ring in Quenching-Tempering Process based on Metallo-thermo-mechanics
Proceedings of the Second International Conference on Quenching and Control of Distortion, Cleveland, Nov.4-7, 1996. pp.249-257

198. Fumiaki Ikuta, Kyozo Arimoto and Tatsuo Inoue
Computer Simulation of Residual styresses/Distortion and Structural
Change in the courseof Scaning Induction Hardening
Proceedings of the Second International Conference on Quenching and Control of Distortion, Cleveland, Nov.4-7,1996.pp.259-266

199. 金森英夫，中村英一，内田　均，小山三郎，井上達雄
　　　　熱処理用冷却剤の熱伝達率の同定
　　　　　　熱処理，36巻，５号，390-396頁（1996-12）

200. Tatsuo Inoue and Kyozo Arimoto
Development and Implementation of CAE System "HEARTS" for Heat Treatment Simulation based on Metallo-thermo-mechanics
J. Materials Engineering　and Performance, ASM International, Vol.6, No.1(1997-1) pp.51-60

201. 中崎一之，井上達雄
　　　　パルスYAGレーザーによる炭素鋼の焼入れの変態・熱・力学的シミュレーション
　　　　　　材料，46巻，３号，268-275頁（1997-3）

202. Tatsuo Inoue,Takuya Uehara,Hiroyuki Ikuta and Itsuki Miyata
The Japanese Sword ---- Heart Treatment Process Simulation incorporating Phase transformation
Proceedings of International Confertence on Materials and Mechanics'97, July 20-2, 1997 Tokyo. JSME, pp.137-142

203. 水野　衛，阿部健一郎，井上達雄
　　　　遠心鋳造法による金属基複合材料の創成とその弾性的特性の評価
　　　　　　材料，46巻，８号，946-951頁　(1997-8)

204. T.Igari, M. Kobayashi, S. Imatani, Y. Takahashi, R. Take and T. Inoue
Inelastic Analysis of New Thermal Ratchetting due to Moving Temperature Front ---Results of Benchmark Project(A) by JSMS
Transactions of 14th International Conference on Structural Mechanics in Reactor Technology, Lyon, Aug.17-22, 1997, Vol.9(Division-L),pp.213-220

205. F. Yoshida, M. Kobayashi, K. Tsukimori, T. Uno, Y. Fukuda, T.Igari and T. Inoue
Inelastic Analysis of Material Ratchetting of 316FR at Varying Temperature ---Results of Benchmark Project(B) by JSMS
Transactions of 14th International Conference on Structural Mechanics in Reactor Technology, Lyon, Aug.17-22, 1997, Vol.9(Division-L),pp.221-228

206. 上原拓也，井上達雄
溶融・凝固過程における相変態，温度および応力の分子動力学シミュレーション
日本機械学会論文集，A 編,63巻.614号(1997.10) 2135-2141

207. Takuya Uehara and Tatsuo Inoue,
Molecular Dynamics Simulation of Heat Conduction and Thermal Stress in Relation with Continuum Mechanics,
Materials Science Research International,Vol.4, No.1, pp.45-52 (1998-3)

208. Fumiaki Ikuta and Tatsuo Inoue
Simulation of residual Sstreses/distortion and Structural Change in the Course of Stationary and Scanning Induction Hardening Processes for Steel Rings and Cylinders
Proceedings of the 17th Heat Treating Society Conference and Exposition and the 1st International Induction Heat Treating Symposium,Indianapolis, pp.541-550 (1998-3)

209. Tatsuo Inoue
Macro- and Microscopic Simulation of Materio-Thermo-Mechanical Fields
Metals and Materials, (Proceedings of the 4th Asia-Pacific Symposium on Advances in Plasticity and its Applications), Vol.4, No.3(1998)pp. 227-234

210. Dong-Ying Ju and Tatsuo Inoue
Thermo-mechanical Behavior and Residual Stress Simulation in Heat Treatment Process of Metal Matrix Composites, (Invited paper), Proceedings of 5th International Conference on Residual Stresses, Vol.1,　pp.378-385(1997)


211. 生田文昭，堀野　孝，井上達雄
　　　　高周波移動焼入れ過程における残留応力・ひずみおよび組織のコンピューターシミュレーション
　 材料，47巻，９号(1998-9)892-898頁

212. 上原拓也，井上達雄
薄膜の溶融・凝固過程における表面形状と微視構造変化の分子動力学シミュレーション
日本機械学会論文集，A 編,64巻.626号(1998.10) 2448-2４551

213. Tatsuo Inoue
Residual Stress and Distortion----Metallo-thermo-mechanics Simulation of Engineering Processes incorporating Phase Transformation
Mathematical Modelling of Weld Phenomena, (ed. H. Cerjak),1998, Vol.4, pp.547-575

214. Tatsuo Inoue and Takuya Uehara
Molecular Dynamic Simulation of Melting/solidification and Induced Stresses
Proceedings of IUTAM Symposium on Variations of Domains and Free-boundary Problems in Solid Mechanics, Paris, pp.103-111,(1998)

215. Tatsuo Inoue and Takuya Uehara
Phase Transformation and Related Thermo-Mechanical Behavior --- A Molecular Dynamics Approach
Proceedings of EUROMECH-MECHAMAT 3rd Europea Mechanics of Materials Conference on "Mechanics and Multi-Physics Processes in Solids: Experiments, Modelling, Applications", Oxford, 1998

216. Gerard Maugin and Tatsuo Inoue
Progress of Phase Boundaries and Walls in Thermo-deformable Solids: A Canonical Approach
Proceedings of EUROMECH-MECHAMAT 3rd Europe Mechanics of Materials Conference on "Mechanics and Multi-Physics Processes in Solids: Experiments, Modelling, Applications", Oxford,　1998

217. D.N. Fang, W. Lu, W.Y. Yan, K.C. Hwang, and T. Inoue
Stress-strain Relation of CuAlNi SMA Single Crystal under Biaxial Loading - Constitutive Model and Experiments
Acta Materialia,Vol 48. No.1,pp.269-280(1999.1)

218. Tatsuo Inoue，Hiroyuki Inoue, Fumiaki Ikuta and Takashi Horino,
Simulation of Dual Frequency Induction Hardening Process of a Gear Wheel
Proceedings of the 3rd International Conference on Quenching and Control of Distortion, Prague (1999-3) pp.243-250

219. Tatsuo Inoue and Takuya Uehara
Simulation of Materio-Thermo-Mechanical Fields --- Macro- and Microscopic Approach
Proc. 7th JSPS-VCC Seminar on Integrated Eng., pp.257-262, 1998

220. Shoji Imatani, Yasuhiro Okuno and Tatsuo Inoue
Experiment and Simulation for Thick-Plate Bending by High Frequency Inductor
Proceedings of 3rd Sino-Japanese Bilateral Symposium on High Temperature Strength of Materials, pp.120-125, 1998

221. Shigeru Yamanaka, Takayuki Sakanoue, Souichi Yosii, T. Kozuka and Tatsuo Inoue,
Influence of transformation Plasticity on the Distortion of Caburized Quenching Process of Cr-Mo Steel Ring
Proceedings of the 18th Conference on Heat Treating, ASM International, October 12-15, 1998, pp.657-664

222. Takuya Uehara and Tatsuo Inoue
Molecular Dynamics　Approach to Thermo-Mechanical Behavior of a Thin-Film Surface during Melting and Solidification,
Proceedings of 8th International Conference on Mechanical Behaviour of Materials, Victoria, Canada, May 16-21, 2000, Vol.II, pp. 712-717

223. 山中　茂，坂之上隆行，吉井聡一，井上達雄
　　 浸炭焼入れ後の変形に及ぼす変態塑性の影響
材料, 48巻，７号（平成11年７月）733-739頁

224. 中崎一之，井上達雄
　　　　CO2レーザによる炭素鋼の移動焼入れ過程の変態・熱・力学的解析
材料, 48巻，９号（平成11年９月）1003-1010頁

225. Perian Ding, Dong-Ying Ju, Tatsuo Inoue and Edwin de Vries
Numerical Simulation of Forging and Subsequent Heat Treatment of a Rod by the Finite Volume Method
Proceedings of the 3rd International Conference on Physical/Numerical Simulation of Materials and Hot-Working，ICPNS/99, Beijing, China, 1999-10 ,pp..270-280
およびActa Metallurgica Sinica, Vol.13, No.1,pp.270-280(2000-2)

226. Tatsuo Inoue and Takuya Uehara
Phase Transformation and Related Thermomechanical Behavior ----- A Molecular Dynamics Approach
Proceedings of 3rd Mechanics and Materials Conference on Mechanics and Multi-physics
Processes in Solids; Experiments, Modelling and Applications, Oxford, November 23-25, 1998, pp.341-349

227. Gerard A. Maugin and Tatsuo Inoue
Progress of Phase Boundaries and Walls in Thermo-deformable Solids; A Canonical Approach,
Proceedings of 3rd Mechanics and Materials Conference on Mechanics and Multi-physics
Processes in Solids; Experiments, Modelling and Applications, Oxford, November 23-25,
1998, pp.351-360

228. Takuya Uehara and Tatsuo Inoue
Molecular Dynamics Simulation of Melting and Solidification Processes in Thin Film
Advance of Phase Change Optical Recording for Digital Media, Proceedings of the 11th
Symposium on Phase Change Optical Information Strage, PCOS'99, Mishima, November 25-26, 1999, pp.6-11

229. Shigeru Yamanaka, Takayuki Sakanoue, Toshikazu Yoshii and Tatsuo Inoue
Transformation Plasticity - The Effect an Metallo-Thermo-Mechanical Simulation of
Carburized Quenching Process, The Proceedings of 1st International Conference on Thermal
Proceedings of 1st International Conference on Thermal Process Modeling and Computer Simulation, Shanghai, March 28-30, 2000, pp. 185-195

230. Peiran Ding, Dong-Ying Ju, Shoji Imatani and Tatsuo Inoue
Numerical Simulation of Coupled Thermo-mechanical Behavior of a Cylinder Billet during
Hot-Forging Process,
Proceedings of 1st International Conference on Thermal Process Modeling and Computer Simulation, Shanghai, March 28-30, 2000, pp. 263-269

231. 中崎一之, 井上達雄
　　　　　CO2レーザ２次焼入れされたCr-Mo鋼の硬化特性
　　　　　　材料，第49巻，第6号　（平成12年6月），678-684頁
232. Tatsuo Inoue and Kazuo Okamura,
Material Database for Simulation of Metallo-thermo-mechanical Fields,
Proceedings of 5th International Symposium on Quenching and Distortion Control, ASM, St Louis, October, 2000, pp.753-760.

233. Tatsuo Inoue, Takuya Uehara and Tsutomu Gotoh,
Effect of Materials on the Result of Metallo-thermo-meachanical Simulation of Quenched Sword,
Proceedings of 5th International Symposium on Quenching and Distortion Control, ASM, St Louis, October, 2000, pp. 761-767.

234. Kazuyuki Nakasaki and Tatsuo Inoue
Metallo - Thermo - Mechanical Simulation of Laser - Quenching Process of Some Steels,
Proceedings of 5th International Symposium on Quenching and Distortion Control, ASM, St Louis, October, 2000, pp.129-137.

235. Peiran Ding, Tatsuo Inoue, Shoji Imatani, Dong-Ying Ju and Edwin de Vries,
Simulation of the Forging Process incorporating Strain-induced Phase Transformation using the
Finite Volume Method (Part I; Basic Theory and Numerical Methodology),
Materials Science Research International,Vol.7, No.1, (2001-3) pp. 19-26

236. Peiran Ding, Tatsuo Inoue, Shoji Imatani, Dong-Ying Ju and Edwin de Vries,
Simulation of the Forging Process incorporating Strain-induced Phase Transformation using the
Finite Volume Method (Part II; Effects of Strain Rate on Structural Change and Mechanical
Behavior)
Materials Science Research International,Vol.7, No.1, (2001-3) pp. 27―33

237. 上原拓也，上原秀和，井上達雄
面心立方格子における熱伝導の異方性に関する分子動力学シミュレーション
日本機械学会論文集（Ａ編），67巻，656号（平成13年） 625-631頁

238. Chuncheng Liu, Dong-Ying Ju and Tatsuo Inoue,
Numerical Modeling for Simulating Metallo-Thermal-Mechanical Behavior during Carburized and Nitrided Quenching,
Materials Science Research International, Special Publications Vol.2, 2001, pp.469-474

239. Tatsuo Inoue, Takuya Uehara and Takayuki Otsuka,
Metallo-thermo-mechanical Simulation of Quenched Japanese Swords made of Several Steels.
Proceedings of the 5th International Symposium on Microstructures and Mechanical
Properties of New Engineering Materials, (2001) pp. 9-18

240. Tatsuo Inoue and Takuya Uehara
Thermal and Phase Transformation Stress Simulation ---- A Macro- and Microscopic Approach
Thermal Stresses-2001, Proceedings of 4th International Congress on Thermal Stresses, July 2001, Osaka, pp.103-106

241. Atsushi Sakuma and Tatsuo Inoue
Description of Thermo-inelastic Body with Moving Solid/Liquid Interface amd Simulation of Welding
Journal of Thermal Stresses , Vol.24, No. 9 (2000-9) pp.863-879.

242. Kazuyuki Nakasaki and Tatsuo Inoue
Effect of Carbon Content on Hardened Structure of Laser Beam Irradiated Cr-Mo Steels
Experiment and Simulation
Proceedings of 7th Asia Foundry Congress, Taipei, October 12-14, 2001, pp.235-245



243. Tatsuo Inoue, Takuya Uehara and Masanori Kawahara
Phase-Field Simulation of Dendritic Growth by use of Material Parameters Identified by Molecular Dynamics Method
Proceedings of 7th Asia Foundry Congress, Taipei, October 12-14, 2001, pp.503-512.

244. Dong-Ying Ju and Tatsuo Inoue
Inelastic Behavior of SUS-304 Stainless Stell at Ultra High Temperature and
Application to the Simulation of Strip Continuous Casting by
Twin Roll Method
Proceedings of 7th Asian Foundry Congress, Taipei, October 12-14, 2001, pp.535-544

245. 中崎一之、井上達雄
　　　　　炭素量の異なるCr-Mo鋼のYAGレーザ焼入れによる硬化組織
　　　　　　　　　材料システム,　20巻（平成14年2月）105-113頁
　　　
246. Toshihide Igari, Mineo Kobayashi, Fusahito Yoshida, Shoji Imatani, Tatsuo Inoue,
Inelastic analysis of new thermal ratchetting due to traveling temperature front
International Journal of Plasticity, 18 (2002) pp.1191-1217.

247. Tatsuo Inoue, Takuya Uehara and Takayuki Ohtsuka,
Metallo-thermo- Simulation of Quenching of Japanese Swords depending on Materials
Proceedings of the Fifth World Congress on Computational Mechanics (WCCM-V), 2002 (Web-publishing)

248. Tatsuo Inoue and Yoshihiro Morimoto,
Metallo-thermo-mechanical Simulation of Jominy End Quench Tests introducing Developed Material Database "MATEQ"
Proceedings of the Fifth World Congress on Computational Mechanics (WCCM-V), 2002 (Web-publishing)

249. Takuya Uehara and Tatsuo Inoue,
A Molecular Dynamics Study on Solid-Liquid Interface and its Application to Phase-Field Simulation
Proceedings of the Fifth World Congress on Computational Mechanics (WCCM-V), 2002 (Web-publishing)

250. Takuya Uehara, Masanori Kawahara, Tatsuo Inoue
Computer Simulation of Dendritic Crystal Growth by Use of Phase-Field Model Based on Molecular Dynamical Evaluation
Proceedings of the Fifth World Congress on Computational Mechanics (WCCM-V), 2002

251. Chuncheng Liu, Dong-Ying Ju and Tatsuo Inoue,
Numerical Modeling for Simulating Metallo-Thermal-Mechanical Behavior during Carburized and Carbonitrided Quenching,
ISIJ Journal, Vol.42, No.10, (2002), pp. 1125-1134.

252. Peiran Ding, Tatsuo Inoue, Shoji Imatani, Dong-Ying Ju and Edwin de Vries
Forging Simulation incorporating Strain-induced Phase Transformation using the Finite Volume Method
Proceedings of IUTAM Symposium on Computational Mechanics of Solid Materials at Large Strain, Stuttgart, August. 2001 (to appear)

253. Tatsuo Inoue and Yoshihiro Morimoto
Metallo-Thermo-Mechanical Simulation of Jominy Tests for Several Steels
Proceedings of 13th Heat Treating Symposium, International Federation of Heat Treatment Science and Engineering, Columbus, 2002-10 (to appear)

254. Takayuki Otsuka and Tatsuo Inoue,
An Experimental Method to identify the Transformation Plastic Behavior
Proceedings of 13th Heat Treating Symposium, International Federation of Heat Treatment Science and Engineering, Columbus, 2002-10 (to appear)

255. Peiran Ding, Tatsuo Inoue, Shoji Imatani, Dong-Ying Ju and Edwin de Vries,
Forging Process Simulation of a Bevel Gear by the Finite Volume Method when considering
Strain-induced Martensite Transformation, 　
Journal of Materials and Engineering Performance, ASM (to appear)

256. 大塚貴之、井上達雄，
4点曲げによる変態塑性係数の簡易同定法とパーライト変態における結果　
　　　　　　　材料、（掲載予定）

257. 井達雄, 森本吉浩，
材料データベースMATEQを用いたJominy試験の変態・熱・力学的シミュレーション
　 材料、（掲載予定）

258. 中崎一之、井上達雄、
Cr-Mo鋼のレーザ焼入に及ぼす炭素含有量の影響に関する変態・熱・力学的解析、
材料、（掲載予定）

259. 中崎一之、井上達雄、
炭素鋼のパルスYAGレーザ焼入に及ぼす照射面の形状効果――第１報：レーザ照射面が円柱状凹凸部をもつ場合　　　　　　
熱処理、（投稿中）

260.　中崎一之、井上達雄、
炭素鋼のパルスYAGレーザ焼入に及ぼす照射面の形状効果――第２報：レーザ照射面が円錐形および球状形凹凸部をもつ場合　　　　　　
熱処理、（投稿中）

261.　Tatsuo Inoue,
Macro-, Meso- and Micro-Scopic Metallo-thermo-mechanics --- Theories and applications -
Proceedings of 2nd International Conference on Thermal Process Modelling and Computer Simulation (ICTPCS), Nancy, March 31-April2, 2003, Plenary Lecture,
(to appear)